Cross posted from Darrell's Hammered Out Bits
As part of my nefarious plans * for the Earth, Air Celtic Festival at Goderich, this year's demonstration was of a Viking Age glass bead making furnace.
Now, this is really the research project of Neil Peterson, fellow member of DARC. Neil has driven the project, and has applied his (considerable) analytical powers to understanding the related archaeological remains. Much of our work has been focused on the remains from Ribe, Denmark. One of the problems is that the actual bead making furnaces are only represented by a number of clay base plates, with none of the upper portions of the furnaces surviving. There are plentiful examples of scrap and waste glass from the making process, as well as a large number of various styles of completed beads. As glass is virtually indestructible, glass beads are a common grave find as well.
My contribution to the beginning of the project was as the 'fire guy', lending my forge experience to the problem of how to construct and operate a charcoal burning glass furnace. It quickly was apparent to me that I needed some direct experience with how glass bead making works! To that end I assembled a basic set of modern lamp working tools and supplies, and made roughly 150 beads - just to get the hang of it.
Neil had made the furnace up a week before and allowed it to air dry. The construction is made of our standard 50 / 50 mix of powdered clay / shredded dry horse manure. The base oval is roughly 30 x 60 cm, and it stands about 30 cm tall. This is the ninth rendition of the basic plan, which at this point is close to an effective layout in terms of heat generation and functional spaces. (For some discussion of alternative designs and functional aspects, see an earlier posting. )
One continuing point of experimentation remains the problem of creating the required temperatures for glass working - and sustaining them, within the furnace. Charcoal supplied with a gentle (!) air blast will certainly produce the required temperatures. One problem remains getting heat without excessive ash floating around (and sticking to the surface of the beads).
One very successful addition to the interior of the furnace is to place a triangular diverter on the wall directly opposite the tuyere entry. Combined with a slight down angle to the tuyere, the net effect is a spiral pattern to the air flow and thus heat generation pattern. In this furnace, this circular pattern was clear in the way the charcoal was consumed.
Our current furnaces provide two possible working methods.
One is inside the furnace, through a port cut into the two long axis ends. For this furnace, Neil and I made slightly different cut angles and locations. I had kept to a more rectangular shape, and also cut the angle of the upper edge so it sloped upwards into the furnace. Generally this proved more effective in reducing some of the volume of hot air blast escaping towards the operator.
The second working area is inside the exhaust stack on the top of the furnace. Although a fresh charge of charcoal certainly provides enough heat here to bring the glass to working temperatures, the effective duration remains short. I think some additional refinements in the shape of the upper structure may improve the function of the stack area.
I worked as much as possible with the two types of tesseri (broken tiles) that Neil had purchased. By this point I (more or less) have managed to figure out how to take an irregular rectangle and wind it up to a roughly ball shape on a mandrill.
One important addition to our working method was developed by Neil over this session.
I can more or less manage a bead shape, even a bead with some decoration. Where it comes apart for me (literally) is in getting the finished bead off the mandrill! Neil had looked closely at a video of traditional workers and seen that they were able to tap off a still hot bead with a metal tool. After a number of failures, he discovered the key is in tapping the mandrill first, which seems to break up and loosen the applied clay separator / resist.
Although not shot at Goderich, there is a video clip on YouTube which shows an earlier experiment in this series.
For more information on the ongoing research into Norse glass beads and making, see the area on the DARC web site.
* Evil Nefarious Plan:
Is to introduce an element of archaeology, specifically Experimental Archaeology, into the fabric of the Festival. Next year marks 20 years for the Earth, Air Celtic Festival. I have tentative approval to build and operate a Celtic Iron Age, slag pit styled, iron smelting furnace as the public demonstration. In conjunction, my intended Celtic College offering will be 'Ancient Celtic Ironwork'. Students will work with a ground pit charcoal forge, bellows air and small block anvils. The likely projects will be small knives and spear points. On the last College session, they will aid in constructing the smelting furnace.
The day long firing of the furnace will be a major demonstration at the Festival, allowing for direct participation of students and others.
It will certainly be the very first time this type of furnace has ever been publicly presented in Canada, perhaps the first time in all of North America.
Saturday, August 13, 2011
Wednesday, August 3, 2011
On Saturday August 4 and Sunday 5, Neil Peterson (of DARC) and myself will be demonstrating Norse glass bead making techniques. The presentation will run roughly 1 PM - 4 PM, as part of the activities inside the Earth, Air Celtic Festival in Goderich Ontario.
For information and directions to the Festival web site.
Neil and I will be actually continuing our experimental work with Viking Age charcoal fired glass furnaces, based on artifact evidence largely from Ribe, Denmark. This has been an ongoing research and practical skills development project largely under Neil's leadership.
This will be a departure from what you have seen me do at the Festival in the past. In previous years, I have been illustrating proven techniques, which often have a historic basis, but generally I have been using modern tools. The focus is often towards the production of a finished object.
Here the stress is on experimental archaeology. The methods, even the exact tools, used by ancient Norse bead makers are not well represented by artifacts. The furnaces are represented only by flat base plates, no intact upper portions have ever been found. There is a LOT of guess work and trial & error involved!
So come watch us work - its sure to be an adventure. New discoveries can be made at any time!
|Sep 26, 2015||DARC at Althing (SCA)|
|Oct 11, 2015||Research Smelt|
|Oct 31, 2015||Research Smelt|
|Apr 2, 2016||FITP XXVI|
|May 12-15, 2016||International Congress, Kalamazoo|
|Jun 18, 2016||Smelt|
|Oct 9, 2016||Smelt|
|Oct 30, 2016||Smelt|
|Summer 2017*||European Tour*|
- ► 2012 (22)
- ▼ 2011 (20)
- Darrell Markewitz
- Karen Peterson
- Neil Peterson
- Vandy Simpson
- Contact Us: email@example.com